What is being measured?
Magnetic flux density and magnetic field strength are different quantities. Relating them can require a material model, not only a conversion factor.
This quantity is B, not magnetic field strength H. H-to-B requires permeability and material context.
Meaning of µT
Microteslas uses the symbol µT in this library and measures magnetic flux density. Under the stated reference convention, 1 µT = approximately 0.000001 T. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.
Conversion method
Multiply the value by the source factor (0.000001), then divide by the target factor (1). The factor ratio expresses the same magnetic flux density measurement in the other unit.
Worked example
For a known value of 10 µT, the reference conversion gives 0.00001 T. Converting that result back gives approximately 10 µT. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.
Common reference values
| Input (µT) | Reference equivalent (T) |
|---|---|
| 1 | 0.000001 |
| 5 | 0.000005 |
| 10 | 0.00001 |
| 25 | 0.000025 |
| 50 | 0.00005 |
| 100 | 0.0001 |
Compare one µT with other units
| Target unit | Equivalent of 1 µT | Definition guide |
|---|---|---|
| Teslas (T) | 0.000001 | Read definition |
| Milliteslas (mT) | 0.001 | Read definition |
| Nanoteslas (nT) | 1000 | Read definition |
| Gauss (G) | 0.01 | Read definition |
| Milligauss (mG) | 10 | Read definition |
| Picoteslas (pT) | 1000000 | Read definition |
Precision and common mistakes
- Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
- Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
- Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
- Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.
Use a working converter
- Magnetic flux density converter
- Microteslas to Teslas converter
- Microteslas to Gauss converter
- Microteslas to Milliteslas converter
- Microteslas to Nanoteslas converter
- Microteslas to Milligauss converter
Source and verification scope
Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.