What is being measured?
Volume describes a three-dimensional extent or a quantity of liquid under a specified volume convention. US and imperial liquid measures can have different definitions.
Cups, pints, quarts, tablespoons and teaspoons use US customary liquid measures. Imperial gallons are separate. These are volume conversions; ingredient mass also depends on density.
Meaning of US pt
US liquid pints uses the symbol US pt in this library and measures volume. Under the stated reference convention, 1 US pt = approximately 0.000473176473 m³. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.
Conversion method
Multiply the value by the source factor (0.000473176473), then divide by the target factor (1). The factor ratio expresses the same volume measurement in the other unit.
Worked example
For a known value of 10 US pt, the reference conversion gives 0.00473176473 m³. Converting that result back gives approximately 10 US pt. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.
Common reference values
| Input (US pt) | Reference equivalent (m³) |
|---|---|
| 1 | 0.000473176473 |
| 5 | 0.002365882365 |
| 10 | 0.00473176473 |
| 25 | 0.011829411825 |
| 50 | 0.02365882365 |
| 100 | 0.0473176473 |
Compare one US pt with other units
| Target unit | Equivalent of 1 US pt | Definition guide |
|---|---|---|
| Cubic metres (m³) | 0.000473176473 | Read definition |
| Litres (L) | 0.473176473 | Read definition |
| Millilitres (mL) | 473.176473 | Read definition |
| US liquid gallons (US gal) | 0.125 | Read definition |
| Cubic feet (ft³) | 0.0167100694444 | Read definition |
| cubic inches (in³) | 28.875 | Read definition |
| cubic yards (yd³) | 0.000618891460905 | Read definition |
| imperial gallons (imp gal) | 0.104084273079 | Read definition |
Precision and common mistakes
- Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
- Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
- Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
- Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.
Use a working converter
- Volume converter
- US liquid pints to Millilitres converter
- US liquid pints to Litres converter
- US liquid pints to Cubic metres converter
- US liquid pints to cubic centimeters converter
- US liquid pints to cubic inches converter
Source and verification scope
Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.
Sources
- NIST / BIPM: NIST: unit conversion factors ↗ · 2026-10-08