What is being measured?
Speed is the magnitude of motion per time. These conversions change its unit and do not infer a velocity direction.
Convert compatible measurements of the same quantity. A unit conversion does not infer a new physical property.
Meaning of ft/s
feet per second uses the symbol ft/s in this library and measures velocity. Under the stated reference convention, 1 ft/s = approximately 0.3048 m/s. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.
Conversion method
Multiply the value by the source factor (0.3048), then divide by the target factor (1). The factor ratio expresses the same velocity measurement in the other unit.
Worked example
For a known value of 10 ft/s, the reference conversion gives 3.048 m/s. Converting that result back gives approximately 10 ft/s. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.
Common reference values
| Input (ft/s) | Reference equivalent (m/s) |
|---|---|
| 1 | 0.3048 |
| 5 | 1.524 |
| 10 | 3.048 |
| 25 | 7.62 |
| 50 | 15.24 |
| 100 | 30.48 |
Compare one ft/s with other units
| Target unit | Equivalent of 1 ft/s | Definition guide |
|---|---|---|
| Metres per second (m/s) | 0.3048 | Read definition |
| Kilometres per hour (km/h) | 1.09728 | Read definition |
| Miles per hour (mph) | 0.681818181818 | Read definition |
| kilometers per second (km/s) | 0.0003048 | Read definition |
| knots (kn) | 0.592483801296 | Read definition |
| speed of light (c) | 1.01670336216e-9 | Read definition |
Precision and common mistakes
- Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
- Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
- Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
- Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.
Use a working converter
- Speed converter
- Feet per second to Metres per second converter
- Feet per second to Kilometres per hour converter
- Feet per second to Miles per hour converter
- Feet per second to knots converter
- Feet per second to kilometers per second converter
Source and verification scope
Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.
Sources
- NIST / BIPM: NIST: unit conversion factors ↗ · 2026-10-08