MEASUREMENT & METHODS

metric horsepower (hp metric): power unit guide

Understand metric horsepower (hp metric) for power. Check base-unit equivalents, examples, comparison tables and source conventions.

What is being measured?

Power is the rate of energy transfer. Power and energy differ by a time interval; watts and watt-hours cannot be exchanged by a unit factor alone.

Horsepower is mechanical unless marked metric. PS equals metric horsepower. Refrigeration tons use the US 12,000 BTU IT/h convention.

Meaning of hp metric

metric horsepower uses the symbol hp metric in this library and measures power. Under the stated reference convention, 1 hp metric = approximately 735.49875 W. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.

Conversion method

Multiply the value by the source factor (735.49875), then divide by the target factor (1). The factor ratio expresses the same power measurement in the other unit.

Worked example

For a known value of 10 hp metric, the reference conversion gives 7354.9875 W. Converting that result back gives approximately 10 hp metric. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.

Common reference values

Input (hp metric)Reference equivalent (W)
1735.49875
53677.49375
107354.9875
2518387.46875
5036774.9375
10073549.875

Compare one hp metric with other units

Target unitEquivalent of 1 hp metricDefinition guide
Watts (W)735.49875Read definition
Kilowatts (kW)0.73549875Read definition
Megawatts (MW)0.00073549875Read definition
btu per hour (BTU IT/h)2509.62590599Read definition
Mechanical horsepower (hp mech)0.98632007062Read definition
tons of refrigeration (TR)0.209135492166Read definition
Nanowatts (nW)735498750000Read definition
Microwatts (µW)735498750Read definition

Precision and common mistakes

  • Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
  • Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
  • Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
  • Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.

Use a working converter

Source and verification scope

Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.

Sources

Read the calculation and sourcing methodology →