What is being measured?
Data size uses explicit bit, byte and decimal/binary prefix conventions. One byte contains eight bits; decimal and binary kilo-style prefixes differ.
Decimal prefixes use powers of 1,000; binary prefixes use powers of 1,024. One byte is eight bits.
Meaning of KiB
Kibibytes (binary) uses the symbol KiB in this library and measures data. Under the stated reference convention, 1 KiB = approximately 1024 B. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.
Conversion method
Multiply the value by the source factor (1024), then divide by the target factor (1). The factor ratio expresses the same data measurement in the other unit.
Worked example
For a known value of 10 KiB, the reference conversion gives 10240 B. Converting that result back gives approximately 10 KiB. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.
Common reference values
| Input (KiB) | Reference equivalent (B) |
|---|---|
| 1 | 1024 |
| 5 | 5120 |
| 10 | 10240 |
| 25 | 25600 |
| 50 | 51200 |
| 100 | 102400 |
Compare one KiB with other units
| Target unit | Equivalent of 1 KiB | Definition guide |
|---|---|---|
| Bytes (B) | 1024 | Read definition |
| Kilobytes (decimal) (kB) | 1.024 | Read definition |
| Megabytes (decimal) (MB) | 0.001024 | Read definition |
| Mebibytes (binary) (MiB) | 0.0009765625 | Read definition |
| Bits (bit) | 8192 | Read definition |
| Gigabytes (decimal) (GB) | 0.000001024 | Read definition |
| Terabytes (decimal) (TB) | 1.024e-9 | Read definition |
| Gibibytes (binary) (GiB) | 9.53674316406e-7 | Read definition |
Precision and common mistakes
- Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
- Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
- Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
- Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.
Use a working converter
- Data size converter
- Kibibytes (binary) to Bits converter
- Kibibytes (binary) to Bytes converter
- Kibibytes (binary) to Kilobytes (decimal) converter
- Kibibytes (binary) to Megabytes (decimal) converter
- Kibibytes (binary) to Gigabytes (decimal) converter
Source and verification scope
Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.
Sources
- NIST / BIPM: NIST: unit conversion factors ↗ · 2026-10-08
- NIST: Binary prefixes ↗ · 2026-10-09