What is being measured?
Conductance is the reciprocal of resistance for the same electrical element and conditions. Unit conversion alone does not infer those conditions.
Mho is another name for siemens. Conductance is the reciprocal of resistance; this converter changes conductance units only.
Meaning of pS
Picosiemens uses the symbol pS in this library and measures electrical conductance. Under the stated reference convention, 1 pS = approximately 1e-12 S. This equivalence changes how a known value is written. It does not increase measurement accuracy or establish whether a measurement is appropriate to a real application.
Conversion method
Multiply the value by the source factor (1e-12), then divide by the target factor (1). The factor ratio expresses the same electrical conductance measurement in the other unit.
Worked example
For a known value of 10 pS, the reference conversion gives 1e-11 S. Converting that result back gives approximately 10 pS. This reverse check helps catch a reversed factor, but matching round-trip arithmetic alone does not independently verify a source definition.
Common reference values
| Input (pS) | Reference equivalent (S) |
|---|---|
| 1 | 1e-12 |
| 5 | 5e-12 |
| 10 | 1e-11 |
| 25 | 2.5e-11 |
| 50 | 5e-11 |
| 100 | 1e-10 |
Compare one pS with other units
| Target unit | Equivalent of 1 pS | Definition guide |
|---|---|---|
| Siemens (S) | 1e-12 | Read definition |
| Millisiemens (mS) | 1e-9 | Read definition |
| Microsiemens (µS) | 0.000001 | Read definition |
| Nanosiemens (nS) | 0.001 | Read definition |
| Kilosiemens (kS) | 1e-15 | Read definition |
Precision and common mistakes
- Keep the source and target quantity consistent. A matching symbol is not enough to establish a compatible definition.
- Record the original measurement precision. Showing twelve significant digits in a table does not make a rounded input more precise.
- Check symbol capitalization, prefixes and any regional convention in the source. Use the displayed unit definition rather than a similarly named unit.
- Factors involving repeating fractions or π use finite numerical precision. Round the final answer to the precision justified by your input.
Use a working converter
- Electrical conductance converter
- Picosiemens to Siemens converter
- Picosiemens to Millisiemens converter
- Picosiemens to Microsiemens converter
- Picosiemens to Nanosiemens converter
- Picosiemens to Kilosiemens converter
Source and verification scope
Examples and tables are computed from the versioned unit definitions used by the linked converters. The source access dates appear below. Computandum is independent of the cited organizations; a citation does not mean that a publisher endorses this page or an actual project.