Piconewtons to dynes converter
Convert Piconewtons (pN) to dynes (dyn). Calculate a value, check the formula and compare common measurements.
Result for the values shown.
Calculations run in your browser.
What to enter
| Input | Meaning and units |
|---|---|
| Value | Enter value using the definition in the method and example. |
| From | Select the unit or currency in which the entered number is currently expressed. |
| To | Select the unit or currency you need for the answer. |
Understanding your result
The converted value describes the same force quantity in the selected target unit. Display rounding does not add precision to the original measurement.
Common mistakes
- Confusing the source and target units, or overlooking a prefix or case-sensitive symbol.
Check your calculation
- Convert to the target unit and then reverse the direction. Within display rounding, you should recover the original value.
Read the force measurement guide · Calculation checks, sources and review limits
How do I convert piconewtons to dynes?
Enter the value in piconewtons to find the same force quantity in dynes. The number changes to match the unit; the underlying quantity stays the same. Check the definitions below when a unit has more than one convention.
Common uses
- Compare loads expressed in different force units.
- Translate force values before using an engineering formula.
How it works
For the displayed direction, 1 pN equals 1e-7 dyn. The engine converts through the shared force base quantity. Gravity-derived factors use standard gravity 9.80665 m/s². Ton-force means US short ton-force. The multiplier is derived from the two centralized unit factors. Keep full precision until the final result; displayed answers use up to 12 significant digits. SI prefixes specify powers of ten: femto 10^-15, pico 10^-12, nano 10^-9, micro 10^-6, milli 10^-3, kilo 10^3, mega 10^6, giga 10^9 and tera 10^12. Unit symbols are case-sensitive. The numerical conversion uses the ratio of the source and target scale factors.
Worked example
10 pN converts to 0.000001 dyn. For the reverse direction, swap the units and enter 0.000001 dyn; the result is approximately 10 pN.
FAQ
How do I convert pN to dyn?
dyn = pN × 1e-7
Which definition is used?
Gravity-derived factors use standard gravity 9.80665 m/s². Ton-force means US short ton-force.
Common values
Use “Swap units” above for the reverse conversion. Values below are rounded to six significant digits.
| Piconewtons | dynes |
|---|---|
| 1 | 1e-7 |
| 5 | 5e-7 |
| 10 | 0.000001 |
| 20 | 0.000002 |
| 30 | 0.000003 |
| 50 | 0.000005 |
| 100 | 0.00001 |