Kilowatts per square meter to Watts per square centimeter converter
Convert Kilowatts per square meter (kW/m²) to Watts per square centimeter (W/cm²) for heat flux density. Check the formula and worked example.
Result for the values shown.
Calculations run in your browser.
What to enter
| Input | Meaning and units |
|---|---|
| Value | Enter value using the definition in the method and example. |
| From | Select the unit or currency in which the entered number is currently expressed. |
| To | Select the unit or currency you need for the answer. |
Understanding your result
The converted value describes the same heat flux quantity in the selected target unit. Display rounding does not add precision to the original measurement.
Common mistakes
- Confusing the source and target units, or overlooking a prefix or case-sensitive symbol.
Check your calculation
- Convert to the target unit and then reverse the direction. Within display rounding, you should recover the original value.
Read the heat flux measurement guide · Calculation checks, sources and review limits
How do I convert Kilowatts per square meter to Watts per square centimeter?
Enter the known measurement and select its source and target units. The converter expresses the same heat flux density quantity in the target unit, using the stated definitions.
Common uses
- Compare measurements stated in different units.
- Translate a known value before using it in a formula or specification.
How it works
Convert through the shared base quantity using the two defined factors. Heat flux density measures heat flow per unit area. The same unit dimensions can describe irradiance, which measures incident radiant power per unit area. Conversion changes the unit of a known measurement; it does not calculate another physical quantity or imply a material model. Factors with π or repeating rational values use finite precision; results display up to 12 significant digits.
Worked example
10 kW/m² equals approximately 1 W/cm². Reverse the units to convert in the other direction.
Common values
Use “Swap units” above for the reverse conversion. Values below are rounded to six significant digits.
| Kilowatts per square meter | Watts per square centimeter |
|---|---|
| 1 | 0.1 |
| 5 | 0.5 |
| 10 | 1 |
| 20 | 2 |
| 30 | 3 |
| 50 | 5 |
| 100 | 10 |