G force to meters per second squared converter
Convert g force (g₀) to meters per second squared (m/s²). Calculate a value, check the formula and compare common measurements.
Result for the values shown.
Calculations run in your browser.
What to enter
| Input | Meaning and units |
|---|---|
| Value | Enter value using the definition in the method and example. |
| From | Select the unit or currency in which the entered number is currently expressed. |
| To | Select the unit or currency you need for the answer. |
Understanding your result
The converted value describes the same acceleration quantity in the selected target unit. Display rounding does not add precision to the original measurement.
Common mistakes
- Confusing the source and target units, or overlooking a prefix or case-sensitive symbol.
Check your calculation
- Convert to the target unit and then reverse the direction. Within display rounding, you should recover the original value.
Read the acceleration measurement guide · Calculation checks, sources and review limits
How do I convert g force to meters per second squared?
Enter the value in g force to find the same acceleration quantity in meters per second squared. The number changes to match the unit; the underlying quantity stays the same. Check the definitions below when a unit has more than one convention.
Common uses
- Compare acceleration readings in different units.
- Translate between standard gravity and acceleration units.
How it works
For the displayed direction, 1 g₀ equals 9.80665 m/s². The engine converts through the shared acceleration base quantity. Use consistent physical definitions; conversion changes the unit, not the measured quantity. The multiplier is derived from the two centralized unit factors. Keep full precision until the final result; displayed answers use up to 12 significant digits.
Worked example
10 g₀ converts to 98.0665 m/s². For the reverse direction, swap the units and enter 98.0665 m/s²; the result is approximately 10 g₀.
FAQ
How do I convert g₀ to m/s²?
m/s² = g₀ × 9.80665
Which definition is used?
The centralized unit definitions in our unit library are used.
Common values
Use “Swap units” above for the reverse conversion. Values below are rounded to six significant digits.
| g force | meters per second squared |
|---|---|
| 1 | 9.80665 |
| 5 | 49.0332 |
| 10 | 98.0665 |
| 20 | 196.133 |
| 30 | 294.2 |
| 50 | 490.332 |
| 100 | 980.665 |