Crushed Stone Calculator
How much crushed stone volume do I need. Enter the quantities below to calculate the result.
Reference calculation or estimate for example inputs; assumptions and limitations apply.
Calculations run in your browser.
What to enter
| Input | Meaning and units |
|---|---|
| Length (m) | Enter length in m; use the same basis as the other measurements. |
| Width (m) | Enter width in m; use the same basis as the other measurements. |
| Depth or thickness (m) | Enter depth or thickness in m; use the same basis as the other measurements. |
| Extra volume allowance (%) | Enter percentage units: 5 means 5%, not a fraction of 0.05. |
Understanding your result
The answer estimates quantity, coverage or cost from the dimensions and allowances you entered. It does not size a structural member, assess capacity or determine installation adequacy.
Common mistakes
- Mixing centimetres with metres, or outside dimensions with the actual filled volume.
- Treating allowance, compaction, supplier yield and density as interchangeable adjustments.
Check your calculation
- Measure independently, subdivide irregular shapes, and compare supplier pack/yield information with the units used here.
Calculation checks, sources and review limits
How much crushed stone volume do I need?
How much crushed stone volume do I need. Enter the quantities below to calculate the result.
Common uses
- How much crushed stone volume do I need
How it works
Multiply measured length, width and uniform depth; add the explicitly entered order allowance.
Worked example
Enter Length: 10 m; Width: 4 m; Depth or thickness: 0.1 m; Extra volume allowance: 10 %. Results: Measured volume: 4 m³; Volume with allowance: 4.4 m³.